Features
1 Wide range of input voltage.
2 High power conversion efficiency.
3 Built-in output ON / OFF switch.
4 Applicable to various purposes by
fine-adjusting the output voltage.
5 Small number of external electronic component required.
6 Heat sink unnecessary.
7 Compact package.
BP5220A / BP5221A / BP5222A : SIP9
If you are engaged in electronic components industry, recommend a professional website,Hqew.net is a Global famous semiconductor,capacitor transaction platform,more Ic parts supply,such as lm358,lm317,ne555,lm324,lm339.
Thursday, April 21, 2011
Description Introduction about IC parts 74LVX161284A
The electronic components LVX161284A contains eight bidirectional data buffers and eleven control/status buffers to implement a full IEEE 1284 compliant interface. The device supports the IEEE 1284 standard, with the exception of output slew rate,and is intended to be used in an Extended Capabilities Port mode (ECP). The pinout allows for easy semiconductor connection from the Peripheral (A-side) to the Host (cable side).
Outputs on the cable side can be configured to be either open drain or high drive (± 14 mA) and are connected to aseparate power supply pin (VCCcable) to allow these outputs
to be driven by a higher supply voltage than the A-side. The pull-up and pull-down series termination resistance of these outputs on the cable side is optimized to
drive an external cable. In addition, all inputs (except HLH) and outputs on the cable side contain internal pull-up resistors connected to the VCCcable supply to provide proper termination and pull-ups for open drain mode.
If you are engaged in electronic component industry, recommend a professional
website,Hqew.net is a Global famous semiconductor,capacitor transaction platform,more Ic parts supply,such as lm358,lm317,ne555,lm324,lm339.
Outputs on the cable side can be configured to be either open drain or high drive (± 14 mA) and are connected to aseparate power supply pin (VCCcable) to allow these outputs
to be driven by a higher supply voltage than the A-side. The pull-up and pull-down series termination resistance of these outputs on the cable side is optimized to
drive an external cable. In addition, all inputs (except HLH) and outputs on the cable side contain internal pull-up resistors connected to the VCCcable supply to provide proper termination and pull-ups for open drain mode.
If you are engaged in electronic component industry, recommend a professional
website,Hqew.net is a Global famous semiconductor,capacitor transaction platform,more Ic parts supply,such as lm358,lm317,ne555,lm324,lm339.
Wednesday, April 20, 2011
DESCRIPTION about electronic component LVX273 and Industry web recommended
The semiconductor LVX273 has eight edge-triggered D-type flip-flops with
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
Tuesday, April 19, 2011
Ic components Industry recommended and DESCRIPTION about model
Electronic component famous enterprise is Hqew.net,many hot model such as Lm358,lm317,ne555 ,lm324,lm339and so on,other 74LV74,Introduces the FEATURES about electronic components 74LV74 and electronic component lm358 details.
The 74LV74 is a low-voltage Si-gate CMOS device and is pin and
function compatible with 74HC/HCT74.
The 74LV74 is a dual positive edge triggered, D-type flip-flop with
individual data (D) inputs, clock (CP) inputs, set (SD) and (RD)
inputs; also complementary Q and Q outputs.
The set and reset are asynchronous active LOW inputs and operate
independently of the clock input. Information on the data input is
transferred to the Q output on the LOW-to-HIGH transition of the
clock pulse. The D inputs must be stable one set-up time prior to the
LOW-to-HIGH clock transition, for predictable operation.
Schmitt-trigger action in the clock input makes the circuit highly
tolerant to slower clock rise and fall times.
The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
The 74LV74 is a low-voltage Si-gate CMOS device and is pin and
function compatible with 74HC/HCT74.
The 74LV74 is a dual positive edge triggered, D-type flip-flop with
individual data (D) inputs, clock (CP) inputs, set (SD) and (RD)
inputs; also complementary Q and Q outputs.
The set and reset are asynchronous active LOW inputs and operate
independently of the clock input. Information on the data input is
transferred to the Q output on the LOW-to-HIGH transition of the
clock pulse. The D inputs must be stable one set-up time prior to the
LOW-to-HIGH clock transition, for predictable operation.
Schmitt-trigger action in the clock input makes the circuit highly
tolerant to slower clock rise and fall times.
The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
Thursday, April 14, 2011
Features and Applications about electronic component UCB1400
1.48-pin LQFP surface mount package and low external component count for
minimal PCB space requirement
2.Integrated AC ’97 Rev. 2.1 interface
3.20-bit stereo audio codec supporting programmable sample rates, and
input/output gain control
4.Stereo line input and mono microphone input
5.Stereo line/headphone output with bass/treble control
6.Headphone driver with short circuit protection and virtual ground for DC
coupling
7.4-wire resistive touch screen interface circuit supporting position, pressure and
plate resistance measurements
8.10-bit successive approximation ADC with internal track-and-hold circuit and
analog multiplexer for touch screen readout and monitoring of four external high
voltage (7.5 V) sources
9.Ten general purpose input/output pins
10.3.3 V supply voltage and built-in power saving modes for portable and battery
powered applications.
Applications
1.Smart mobile phones
2.Handheld PCs
3.Palm-top PCs
4.Personal Intelligent Communicators (PIC)
5.Personal Digital Assistants (PDA).
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
minimal PCB space requirement
2.Integrated AC ’97 Rev. 2.1 interface
3.20-bit stereo audio codec supporting programmable sample rates, and
input/output gain control
4.Stereo line input and mono microphone input
5.Stereo line/headphone output with bass/treble control
6.Headphone driver with short circuit protection and virtual ground for DC
coupling
7.4-wire resistive touch screen interface circuit supporting position, pressure and
plate resistance measurements
8.10-bit successive approximation ADC with internal track-and-hold circuit and
analog multiplexer for touch screen readout and monitoring of four external high
voltage (7.5 V) sources
9.Ten general purpose input/output pins
10.3.3 V supply voltage and built-in power saving modes for portable and battery
powered applications.
Applications
1.Smart mobile phones
2.Handheld PCs
3.Palm-top PCs
4.Personal Intelligent Communicators (PIC)
5.Personal Digital Assistants (PDA).
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
Characteristics and DESCRIPTION about electronic components L6201
1.SUPPLY VOLTAGE UP TO 48V
2.5A MAX PEAK CURRENT (2A max. for electronic components L6201)
3.TOTAL RMS CURRENT UP TO
4.L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A
5.RDS (ON) 0.3 W (typical value at 25 °C)
6.CROSS CONDUCTION PROTECTION
7.TTL COMPATIBLE DRIVE
8.OPERATING FREQUENCY UP TO 100 KHz
9.THERMAL SHUTDOWN
10.INTERNAL LOGIC SUPPLY
11.HIGH EFFICIENCY
DESCRIPTION
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD
technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits
on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the
power stage to achieve the best possible performance. The DMOS output transistors can
operate at supply voltages up to 42V and efficiently at high switching speeds. All the
logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of the device is
controlled by a separate logic input, while a common enable controls both channels.
The I.C. is mounted in three different packages.
The above information from a web site Hqew.net,A professional electronic component trading
market and platform,If you are engaged in IC industry,Suggest you go to the web in search
of the information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
2.5A MAX PEAK CURRENT (2A max. for electronic components L6201)
3.TOTAL RMS CURRENT UP TO
4.L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A
5.RDS (ON) 0.3 W (typical value at 25 °C)
6.CROSS CONDUCTION PROTECTION
7.TTL COMPATIBLE DRIVE
8.OPERATING FREQUENCY UP TO 100 KHz
9.THERMAL SHUTDOWN
10.INTERNAL LOGIC SUPPLY
11.HIGH EFFICIENCY
DESCRIPTION
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD
technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits
on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the
power stage to achieve the best possible performance. The DMOS output transistors can
operate at supply voltages up to 42V and efficiently at high switching speeds. All the
logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of the device is
controlled by a separate logic input, while a common enable controls both channels.
The I.C. is mounted in three different packages.
The above information from a web site Hqew.net,A professional electronic component trading
market and platform,If you are engaged in IC industry,Suggest you go to the web in search
of the information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
Tuesday, April 12, 2011
Features and Description about electronic components BAT54
Features
1.Low conduction and reverse losses
2.Negligible switching losses
3.Low forward and reverse recovery times
4.Extremely fast switching
5.Surface mount device
6.Low capacitance diode
Description
The electronic components BAT54 series uses 40 V Schottky barrier diodes packaged in SOD- 23, SOD-323, SOD-523, SOT-23, SOT-323, or SOT-666.
The above information from a web site Hqew.net,A professional Ic trading market and platform,If you are engaged in IC industry,Suggest you go to the web in search of the information of you need material.Offer popular hot electronic component model for example lm358,lm317,ne555,lm324,lm339.
1.Low conduction and reverse losses
2.Negligible switching losses
3.Low forward and reverse recovery times
4.Extremely fast switching
5.Surface mount device
6.Low capacitance diode
Description
The electronic components BAT54 series uses 40 V Schottky barrier diodes packaged in SOD- 23, SOD-323, SOD-523, SOT-23, SOT-323, or SOT-666.
The above information from a web site Hqew.net,A professional Ic trading market and platform,If you are engaged in IC industry,Suggest you go to the web in search of the information of you need material.Offer popular hot electronic component model for example lm358,lm317,ne555,lm324,lm339.
Subscribe to:
Posts (Atom)